The Heatmiser UH8-N is designed to be used with our 12v network thermostats. For Underfloor Heating - The UH1 provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 Zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 6 actuators can be connected to each zone. An option is provided to turn zone 8 into a radiator zone. In this mode the underfloor heating pump, valve and boiler are not enabled when there is a call for heat from zone 8. Radiator System - The UH1 is not just for underfloor heating. It can equally be used in a radiator only system. The UH8-N provides a network port allowing connection to our network products, including the central Touchpad, Netmonitor and PCLink.
Next Working Day Delivery applies to UK Mainland delivery addresses only and orders must be placed before 12.30 PM Monday to Friday. All orders placed after 12.30 PM Friday and before 12.30 PM Monday, will arrive at the delivery address on Tuesday.Saturday deliveries are available although an additional delivery charge will apply. Orders despatched to addresses outside of the UK mainland may incur a minimal delivery charge. For larger orders such as palletised deliveries, to be despatched to addresses outside of the UK Mainland, these may incur additional delivery costs to those detailed on your order and we may contact you to advise of additional delivery charges prior to despatch. Free UK Delivery applies to orders delivering to UK Mainland with a total value of £250.00 or more excluding VAT.
Your order will be delivered via a 3rd party courier or delivery service on a Standard or Next Day Day Delivery Basis. We advise that you ensure you have received your order prior to booking any installers, screeds etc. Any dates quoted for delivery of the Goods are for guidance only and Underfloor Heating Trade Supplies shall not be liable for any delay in delivery of the Goods howsoever caused.
The Heatmiser UH1 is our central wiring switch box designed to be used with our 12v network thermostats.
The UH1 offers the following functionality;
•Central wiring to up to 8 zone actuators
•Output for under-floor heating valve and pump activated when any thermostat calls for heat
•Works with our low voltage thermostats.
•Output for a single radiator zone
•Output for domestic hot water
•Low voltage wiring to thermostats.
•Network connection to Touchpad, Netmonitor, TR2, PCLink
•Actuator outputs: 240V
