Our EPS 400 Overfloor boards are laminated with aluminium for ultimate rapid heating with 400KPA high compression strength.
EPS 400 overfloor boards are super strong, easy to fit and designed to be fitted over any existing or new floor. They can be simply cut to shape using a fine toothed saw or craft knife.
Suitable for Laminate, Wood, Carpet Vinyl and even TILES.
- Quick to install using Spray contact adhesive ready for use straight away.
- EPS 400(400KPA)
- Easy to cut to shape with basic tools
Eliminates the moisture, weight, mess and lengthy drying times of a screed Underfloor system.
Laminate and engineered wood can be laid on top or tiles can be fixed to the boards using approved adhesive. If you wish to carpet or lay vinyl, a suitable backer board will need to be laid on the Overfloor boards.
Recommended maximum linear loop length of 100m (20mm board) / 60m (16mm board).
Coverage - 0.75m2
Next Working Day Delivery
Applies to UK Mainland only. Order before 12:30pm Mon–Fri. Orders placed after 12:30pm Friday will arrive Tuesday. Saturday delivery is available at an extra cost.
Free delivery
UK Mainland orders over £250 (ex VAT). Larger or palletised orders outside UK Mainland may incur additional fees.
Additional Information
Deliveries are fulfilled by third-party couriers. Delivery times are estimates and we are not liable for delays. For detailed information about shipping, view our Shipping and Returns.
-- Remove all contaminants, dirt, grease etc from the substrate and make dust free.
-- Loose lay the boards across the floor and number the boards on the upper face to identify position of each board, making sure the pipework runs are calculated correctly to reach manifold position.
-- Uplift the numbered boards and prime the underside of the boards with Ultra Floor Prime-IT MSP bonding primer. This should be applied by brush or roller in a thin film. Allow to thoroughly dry to a clear green film ensuring primed face does not come into contact with other boards, walls or subfloor until it is ready to be bedded.
- -Drying time will depend upon ambient conditions but is typically between 1 and 4 hours.
-- Whilst the primer on the boards is drying commence with priming of the substrate using UltraFloor Prime-IT MSP. The primer should be diluted 3 parts water to 1 part primer and allowed to fully dry.
-- Fix with spray contact adhesive or cement based adhesive.
-- Pipe work may be fitted into the boards once they are all secure. Where possible this is best left until the following day. It is recommended that the pipe system is checked for leaks and correct water pressures prior to tiling over.
-- Prime the upper face of the boards with Ultra Prime-IT MSP bonding primer. This should be applied by brush or roller in a thin film. Allow to thoroughly dry to a clear green film, (approx 1-4 hours).
-- If tiling use a suitable adhesive such as ProFlex S2 Fibre Reinforced Flexible Tile Adhesive
-- If using a self levelling compound ensure to use recommended such as Ultra Tile ProLevel Ultimate Semi-Rapid High Performance
Installation Video
-- Click Here
