NovaTherm™ NovaDeck 16mm Cement Faced Overlay Board for 12mm Pipe

The NovaTherm™ NovaDeck 16mm Cement Faced Board is a premium low-profile wet underfloor heating overlay panel, purpose-designed for 12mm pipe laid at 150mm centres. Its high-density 300 kPa XPS core combines insulation and compressive strength with a fibreglass-reinforced cementitious facing for a practical, robust installation surface.

Each 1200 x 600 x 16mm panel covers 0.72m² and includes pre-routed channels and pipe returns to speed up installation. A versatile choice for renovation, retrofit and new-build projects, NovaDeck allows direct tiling using a suitable flexible tile adhesive and supports other compatible floor finishes with the correct preparation.

Incl. Vat: £16.86 £14.05
Availability: In stock
SKU
nvd001

NovaDeck 16mm: Technical Specifications and Installation Guide

Designed for 12mm wet underfloor heating pipe at 150mm centres, this 16mm cement-faced XPS panel offers a slim retrofit solution without a conventional thick screed layer. The high-strength XPS 300 core, factory-routed channels and tough cementitious face help installers create an efficient, consistent pipe layout on a suitable structural subfloor.

Technical specifications

Panel dimensions1200 x 600 x 16mm
Coverage per full board0.72m²
Suitable pipe diameter12mm
Pipe spacing150mm centres
CoreHigh-density extruded polystyrene (XPS 300)
Strength at 10% compression300 kPa
SurfaceFibreglass mesh-reinforced cementitious coating
Thermal conductivityConfirm value for the 16mm NovaDeck variant with Novatherm
Reaction-to-fire classificationConfirm Euroclass rating for the 16mm NovaDeck variant with Novatherm

Key benefits

  • Correctly sized channels for 12mm underfloor heating pipe at 150mm centres
  • Low-profile 16mm panel for retrofit work and projects with limited floor build-up
  • Reinforced cement face suitable for direct tiling with the correct adhesive
  • XPS insulation core with 300 kPa compressive strength
  • Pre-formed pipe routes with returns to reduce on-site preparation
  • Lightweight, easy-to-handle 1200 x 600mm boards

Suitable subfloors and fixing

Install onto a clean, flat, level and fully supported substrate. Suitable bases include cured concrete or screed, structural plywood or cement fibreboard; traditional timber floorboards may need overlay boarding. Use an appropriate combed flexible tile adhesive over suitable solid substrates and manufacturer-approved mechanical fixings on timber. Check moisture conditions and use a damp-proof membrane where required by the floor design.

Floor finishes

Tiles and natural stone can be fixed to the cementitious panel surface using a suitable flexible tile adhesive and the flooring manufacturer’s instructions. Vinyl, carpet, engineered wood and laminate require the specified levelling compound or separating layer. Follow the current Novatherm installation manual for preparation, curing times, floor-finish suitability and commissioning.

Professional trade support

Underfloor Heating Trade Supplies provides installer-focused advice, trade pricing and support with compatible pipework and system components. Contact our team if you need help selecting the correct board thickness, pipe size or quantities for your project.

Next Working Day Delivery

Applies to UK Mainland only. Order before 12:30pm Mon–Fri. Orders placed after 12:30pm Friday will arrive Tuesday. Saturday delivery is available at an extra cost.

Free delivery

UK Mainland orders over £250 (ex VAT). Larger or palletised orders outside UK Mainland may incur additional fees.

Additional Information

Deliveries are fulfilled by third-party couriers. Delivery times are estimates and we are not liable for delays. For detailed information about shipping, view our Shipping and Returns.