Tile Direct Overlay Panel

Our 20mm Panels are suitable for tiling direct – no backerboards or intermediate layers required*, just prime the aluminium for tile adhesives.
No need to dig up floors, just spray and lay!
Tile direct to board! – Suitable for fitting Tile, Stone, Laminate & wood direct to boards.

These Panels are suitable for ALL property types including renovations & refurbishments.

Coverage - 0.72m2

Dimensions: 1200mm x 600mm x 20mm
20mm boards use 16mm pipe in 100m lengths

Incl. Vat: £15.59 £12.99
Availability: In stock
SKU
wund001

Carpet Vinyl and even Tiles. Quick to install using Spray contact adhesive ready for use straight away. 400 kPa - Fully approved by Mapei & Instarmac for tiling directly onto Using Mapei & Instarmac approved S2 flexible adhesive and primers 
400 kPa - the strongest EPS board available (Uses 4 times the material of Low Density Panels for superior strength)
20mm board uses 150mm pipe spacings with 100m pipe length
Mapei & Instarmac approved for tiling directly onto
Easy to cut to shape with basic tools
Eliminates the moisture, weight, mess and lengthy drying times of a screed Underfloor system
Laminate and engineered wood can be laid directly on top. Tiles can be fixed to the boards using Mapei or Instarmac approved adhesive (available from Wunda) just prime the aluminium first. If you wish to carpet or lay vinyl a suitable backer board will need to be laid on the Overfloor boards. The recommended maximum linear loop length for a 20mm board is 100m.

Write Your Own Review
You're reviewing:Tile Direct Overlay Panel