Mark Solway

Bespoke Quote

Regular Price £2,363.04 Incl. Vat: Special Price £1,890.43 £1,575.36
Availability: In stock
SKU
Mark Solway

Our overfloor boards are strong, lightweight and easy to fit. No specialist tools are required. They can be simply cut to shape using a sharp knife or fine toothed saw

Suitable for Tiles, Laminate, Wood, Carpet + Vinyl

-- EPS 300 -  (300KPA)
-- 100 microns aluminium for optimum performance
-- Mapei approved for tiling directly onto
-- Easy to cut to shape with basic tools
-- Eliminates the moisture, weight, mess and lengthy drying times of a screed Underfloor system

Suitable for Tiles, Laminate, Wood, Carpet + Vinyl Quick to install using contact adhesive or panel adhesive. --Laminate and engineered wood can be laid directly on top or tiles can be fixed to the boards using approved fully flexible adhesive --. If you wish to carpet or lay vinyl a suitable backer board will need to be laid on the Overfloor boards. Recommended maximum length of pex al pex pipe - 100m (20mm board).

 

Kit contains:-

  • Actuator (x6)
  • Sensor Probe (x6)
  • 16mm Professional grade MLCP plastic piping that doesn’t warp or split (x450)
  • 6 Port Dualmix manifold faultless performance time after time Including: Manifold Isolating Valves x 2 - Temperature Guage x 2 - Lockshields with flow meters on each port - Drain/fill valves with blank cap x 2 - Automatic air vent x 2 - Metal fixing brackets x 2
  • Reaming tool
  • Primer 5L
  • Profoil Groove + Foil KF300 1250x600x20mm @ 150mm (x82)
  • An A-rated Grundfos 15-50/60 heat pump

Grooved and Foiled Insulation Panel
Extruded Polystyrene-Grade KF300
1250 x 600 x 20mm
4 Grooves @ 150 mm centres + light bulb returns
& 3 X-runs for 16mm O.D pipe

Thermal conductivity=0.034 W/mK
Compressive strength =300kPa
@ 10% compression

Write Your Own Review
You're reviewing:Mark Solway