- Heat Pumps
- BULK TRADE
- Get A Quote
The panels are laid on screed flooring or floorboards and then the piping installed
High strength piping – WRAS approved, Pert-Al-Pert MLCP piping – that doesn’t split when cut and can withstand changes in temperature and pressure
Energy efficient Grundfos 3 speed heat pump
Dualmix manifold with high calibre components
Easy to use room thermostat for responsive control of heat
Specialist tools including reaming tool for secure, leak proof connection between piping and connectors
– Temperature control and pump unit
– 4 Zone Dualmix Manifold -- Including: Manifold Isolating Valves x 2 - Temperature Guage x 2 - Lockshields with flow meters on each port - Drain/fill valves with blank cap x 2 - Automatic air vent x 2 - Metal fixing brackets x 2
– Pert-Al-Pert Pipe 
– Pipe Reamer
– Connector Cores [x8]
– Heatmiser Slimline Programmable Thermostat
– 1200mmx600mmx20mm pre-grooved insulation panels (x69)
Need help and expert advice?
With Underfloor Heating Trade Supplies, everything you need is only a click or a phone call away, including expert hints and tips to make installation and operation of underfloor heating system smoother.
Email us on firstname.lastname@example.org or call our friendly team on 01625 573454
Our EPS 400 Overfloor boards are laminated with thick 200 micron aluminium for ultimate rapid heating with 400KPA high compression strength. 200 microns will give optimum system performance, aluminium any thicker than 200 microns offers no improvement in performance.
MAPEI approved for tiling directly onto - NO intermediate layers or levelling screed required!
EPS 400 overfloor boards are super strong, easy to fit and designed to be fitted over any existing or new floor. They can be simply cut to shape using a fine toothed saw or craft knife.
Suitable for Laminate, Wood, Carpet Vinyl and even TILES.
Quick to install using Spray contact adhesive ready for use straight away.
Fully approved by Mapei for tiling directly onto.
EPS 400 - the strongest EPS board available (400KPA)
200 microns aluminium for optimum Rapid Response® performance
Mapei approved for tiling directly onto
Easy to cut to shape with basic tools
Eliminates the moisture, weight, mess and lengthy drying times of a screed Underfloor system
Laminate and engineered wood can be laid directly on top or tiles can be fixed to the boards using Mapei approved adhesive. If you wish to carpet or lay vinyl a suitable backer board will need to be laid on the Overfloor boards.
Recommended maximum linear loop length of 100m (20mm board) / 60m (16mm board).
MAPEI KERABOND 20kg + MAPEI ISOLASTIC 4.9ltr RATIO 1:1.3